铣削旋转阵列窄槽
零件图如下
先加工圆形凸台，圆形凸台程序T3刀具为12mm直径立铣刀
T3M6
G90G54G40G43H3G00Z100M03S2500
M08
G00X0Y-50
G00Z5
#1=-2
N10 G1Z#1F500
G1G41X12D2 (D02=14)
G3X0Y-38R12
G2J38
G3X-12Y-50R12
G1G40X0
#1=#1-2
IF [#1GE-16] GOTO 10
#1=-2
N20 G1Z#1F500
G1G41X12D01 (D01=6)
G3X0Y-38R12
G2J38
G3X-12Y-50R12
G1G40X0
#1=#1-2
IF [#1GE-16] GOTO 20
G0Z100
T0M6
M9
M5
M30
凸台仿真结果
使用旋转命令编制中间凸台上的旋转槽，使用ø6键槽铣刀加工窄槽，因为槽宽只有8mm，手工编程时如果设置圆弧切入切出比较麻烦，这个例子中直接使用直线切入和切出。参考程序如下：
T1M6
G90G54G40G43H1G00Z100M03S2000
M08
G00Z5
#2=0
N20 G68 X0 Y0 R#2
#1=-1
N10 G00X12Y0
G1Z#1F20
G1G41X15.06Y-2.58D01
G3X20.49Y29.42R32F300
G3X11.82Y25.35R4.8
G2X9.09Y2.74R19.2
G3X15.06Y-2.58R4
G1G40X12Y0
#1=#1-1
IF [#1GE-5] GOTO 10
G0Z5
#2=#2+60
IF {#2 LE 300] GOTO 20
G69
G0Z100
T0M6
M9
M5
M30
这是仿真结果
特别声明：以上内容(如有图片或视频亦包括在内)为自媒体平台“网易号”用户上传并发布，本平台仅提供信息存储服务。
Notice: The content above (including the pictures and videos if any) is uploaded and posted by a user of NetEase Hao, which is a social media platform and only provides information storage services.
