CJME2024年6期目录

Review

Review on Control Strategies for Cable-Driven Parallel Robots with Model Uncertainties

具有模型不确定性的索并联机器人控制策略综述

作者：

Xiang Jin, Haifeng Zhang, Liqing Wang and Qinchuan Li

引用：

Jin, X., Zhang, H., Wang, L. et al. Review on Control Strategies for Cable-Driven Parallel Robots with Model Uncertainties. Chin. J. Mech. Eng. 37, 156 (2024). https://doi.org/10.1186/s10033-024-01149-8

Intelligent

Manufacturing

Technology

Digital Twin-Based Production-Logistics Synchronization System for Satellite Mass Assembly Shop-Floor

基于数字孪生的卫星批量装配车间生产物流同步系统

作者：

Weiran Liu, Xiaofu Zou, Zhiwen Wen, Jiangfeng Cheng, Ying Zuo, Chenyuan Zhang, Hongting Liu and Fei Tao

引用：

Liu, W., Zou, X., Wen, Z. et al. Digital Twin-Based Production-Logistics Synchronization System for Satellite Mass Assembly Shop-Floor. Chin. J. Mech. Eng. 37, 163 (2024). https://doi.org/10.1186/s10033-024-01148-9

Interfacial Microstructures and Mechanical Properties of TiC Reinforced GH 3230 Superalloy Manufactured by Laser Metal Deposition

激光金属沉积TiC增强GH3230高温合金的界面组织与力学性能

作者：

Yan Wang, Neng Li, Wei Liu, Chonglin Jia, Yu Wu, Chao Gao and Huaping Xiong

引用：

Wang, Y., Li, N., Liu, W. et al. Interfacial Microstructures and Mechanical Properties of TiC Reinforced GH 3230 Superalloy Manufactured by Laser Metal Deposition. Chin. J. Mech. Eng. 37, 144 (2024). https://doi.org/10.1186/s10033-024-01103-8

Deep Learning-Based Invalid Point Removal Method for Fringe Projection Profilometry

基于深度学习的条纹投影轮廓技术无效点去除方法

作者：

Nan He, Jiachun Huang, Shaoli Liu, Sizhe Fan, Jianhua Liu, Jia Hu and Hao Gong

引用：

He, N., Huang, J., Liu, S. et al. Deep Learning-Based Invalid Point Removal Method for Fringe Projection Profilometry. Chin. J. Mech. Eng. 37, 142 (2024). https://doi.org/10.1186/s10033-024-01095-5

Milling Characteristics and Damage Assessment of Ultrasonic Vibration-Assisted End Milling Cf/SiC Composites

超声振动辅助端面铣削Cf/SiC复合材料的铣削特性及损伤评估

作者：

Zhongwang Wang, Zhigang Dong, Yan Bao, Yichuan Ran and Renke Kang

引用：

Wang, Z., Dong, Z., Bao, Y. et al. Milling Characteristics and Damage Assessment of Ultrasonic Vibration-Assisted End Milling Cf/SiC Composites. Chin. J. Mech. Eng. 37, 170 (2024). https://doi.org/10.1186/s10033-024-01101-w

Experimental Investigation of the Micro-Milling of Additively Manufactured Titanium Alloys: Selective Laser Melting and Wrought Ti6Al4V

增材制造钛合金的微铣削实验研究：选择性激光熔化和变形Ti6Al4V

作者：

Muhammad Rehan, Tao He, Ahmed K. Khalil, Danish Tahir, Wai Sze Yip and Sandy Suet To

引用：

Rehan, M., He, T., Khalil, A.K. et al. Experimental Investigation of the Micro-Milling of Additively Manufactured Titanium Alloys: Selective Laser Melting and Wrought Ti6Al4V. Chin. J. Mech. Eng. 37, 136 (2024). https://doi.org/10.1186/s10033-024-01139-w

Research on Force-Saving Mechanism of Cutting Tool with Variable Curvature Directrix Rake Face Configuration

变曲率准线构形的前刀面刀具省力机制研究

作者：

Feng Xie, Huawei Wei, Xiaofeng Chen and Chao Lei

引用：

Xie, F., Wei, H., Chen, X. et al. Research on Force-Saving Mechanism of Cutting Tool with Variable Curvature Directrix Rake Face Configuration. Chin. J. Mech. Eng. 37, 150 (2024). https://doi.org/10.1186/s10033-024-01137-y

Research on Influence Mechanism of Nozzle Structure on Properties of Thick Carbon Steel Plate by Laser Cutting

喷嘴结构对厚碳钢板激光切割性能影响的机理研究

作者：

Nan Chen, Yan Shi, Yan Pang and Ruotao Li

引用：

Chen, N., Shi, Y., Pang, Y. et al. Research on Influence Mechanism of Nozzle Structure on Properties of Thick Carbon Steel Plate by Laser Cutting. Chin. J. Mech. Eng. 37, 132 (2024). https://doi.org/10.1186/s10033-024-01138-x

Cutting Force Modeling Considering Wiper Edge Cutting Effect During Face Milling of 316H Stainless Steel and Experimental Verification

虑及修光刃切削效应的316H不锈钢面铣加工切削力建模及实验验证

作者：

Xiuru Li, Quanwei Yang, Yu Liu, Zhaocheng Wei, Jiang Guo, Minjie Wang and Shengxian Liu

引用：

Li, X., Yang, Q., Liu, Y. et al. Cutting Force Modeling Considering Wiper Edge Cutting Effect During Face Milling of 316H Stainless Steel and Experimental Verification. Chin. J. Mech. Eng. 37, 157 (2024). https://doi.org/10.1186/s10033-024-01131-4

Material Removal Uniformity in Water Dissolution Ultraprecision Continuous Polishing for Large-Size Water-Soluble Crystals

大尺寸水溶性晶体水溶解超精密环形抛光材料去除均匀性研究

作者：

Zhipeng Cheng, Ziyuan Liu, Dongming Guo, Qiao Xu and Hang Gao

引用：

Cheng, Z., Liu, Z., Guo, D. et al. Material Removal Uniformity in Water Dissolution Ultraprecision Continuous Polishing for Large-Size Water-Soluble Crystals. Chin. J. Mech. Eng. 37, 145 (2024). https://doi.org/10.1186/s10033-024-01127-0

Effect of Process Parameters on the Mechanical Properties of Simultaneous Double-Sided Friction Stir Welding Joints

工艺参数对双面同时搅拌摩擦焊接头力学性能的影响

作者：

Shaofei Meng, Huihui Zhao, Jiyi Dong, Wu Liu, Haitao Liu and Juliang Xiao

引用：

Meng, S., Zhao, H., Dong, J. et al. Effect of Process Parameters on the Mechanical Properties of Simultaneous Double-Sided Friction Stir Welding Joints. Chin. J. Mech. Eng. 37, 129 (2024). https://doi.org/10.1186/s10033-024-01126-1

Feasibility Study on Magnetorheological Finishing of Thin Copper Substrate

薄铜基板磁流变抛光的可行性研究

作者：

Bo Pan, Renke Kang, Yunfei Zhang, Kailong Li, Dongxing Du, Xiaoguang Guo, Chao Wang, Jiang Guo, Xianglong Zhu and Wen Huang

引用：

Pan, B., Kang, R., Zhang, Y. et al. Feasibility Study on Magnetorheological Finishing of Thin Copper Substrate. Chin. J. Mech. Eng. 37, 164 (2024). https://doi.org/10.1186/s10033-024-01154-x

Microstructure and Mechanical Properties of TC4 Titanium Alloy Joint Fabricated By Vortex Flow-Based Friction Stir Welding

TC4钛合金涡流搅拌摩擦焊接头微观组织及力学性能研究

作者：

Xiaochao Liu, Pengyu Zhang, Wentao Li, Tao Ye, Chuanchao Xia, Tairui Zhang, Junmiao Shi, Jilin Xie and Zhonghua Ni

引用：

Liu, X., Zhang, P., Li, W. et al. Microstructure and Mechanical Properties of TC4 Titanium Alloy Joint Fabricated By Vortex Flow-Based Friction Stir Welding. Chin. J. Mech. Eng. 37, 159 (2024). https://doi.org/10.1186/s10033-024-01152-z

Adaptive Dead Zone Compensation Control Method for Electro-Hydrostatic Actuators Under Low-Speed Conditions

低速工况下电静液作动器自适应死区补偿控制方法

作者：

Haoyi Jiang, Zhenfei Ling, Fengqi Zhou, Maowen Sun, Hao Liu, Lilin Xu, Yeming Yao, Xiaoping Ouyang and Huayong Yang

引用：

Jiang, H., Ling, Z., Zhou, F. et al. Adaptive Dead Zone Compensation Control Method for Electro-Hydrostatic Actuators Under Low-Speed Conditions. Chin. J. Mech. Eng. 37, 168 (2024). https://doi.org/10.1186/s10033-024-01125-2

Analysis of Vibration Characteristics of Electro-hydraulic Driven 3-UPS/S Parallel Stabilization Platform

电液驱动3-UPS/S并联稳定平台振动特性分析

作者：

Xiaoming Yuan, Weiqi Wang, Haodong Pang and Lijie Zhang

引用：

Yuan, X., Wang, W., Pang, H. et al. Analysis of Vibration Characteristics of Electro-hydraulic Driven 3-UPS/S Parallel Stabilization Platform. Chin. J. Mech. Eng. 37, 96 (2024). https://doi.org/10.1186/s10033-024-01074-w

Optimizing Oil Distributor Port for Low-Pulsation Cam-Lobe Hydraulic Motors

内曲线液压马达低脉动配流窗口优化

作者：

Yiman Duan, Hao Tan, Yu Fang, Zhijian Zheng, Junhui Zhang, Bing Xu, Qi Su and Chao Zhang

引用：

Duan, Y., Tan, H., Fang, Y. et al. Optimizing Oil Distributor Port for Low-Pulsation Cam-Lobe Hydraulic Motors. Chin. J. Mech. Eng. 37, 101 (2024). https://doi.org/10.1186/s10033-024-01092-8

Quasi-Static and Dynamic Collapse Behavior of Circular Foam-Filled Tubes Inspired by Bamboos

泡沫填充仿竹圆管的准静态和动态坍塌行为

作者：

Kai Liu, Zhenhao Yu, Kaiyun Wang and Lin Jing

引用：

Liu, K., Yu, Z., Wang, K. et al. Quasi-Static and Dynamic Collapse Behavior of Circular Foam-Filled Tubes Inspired by Bamboos. Chin. J. Mech. Eng. 37, 169 (2024). https://doi.org/10.1186/s10033-024-01146-x

Topological Design of a Nanosatellite Structure with Optimal Frequency Responses Filled by Non-Uniform Lattices

一种模态优化的微纳卫星结构变密度点阵填充拓扑优化设计

作者：

Cunyi Wang, Bin Zhang, Songhua Huang, Weiyuan Dou, Shengzhen Xin and Jiayong Yan

引用：

Wang, C., Zhang, B., Huang, S. et al. Topological Design of a Nanosatellite Structure with Optimal Frequency Responses Filled by Non-Uniform Lattices. Chin. J. Mech. Eng. 37, 161 (2024). https://doi.org/10.1186/s10033-024-01156-9

Novel Multipoint-drive Rotary Actuator for Extraterrestrial Celestial Ultrasonic Driller

一种用于地外天体超声波钻探器的新型多点驱动旋转致动器

作者：

Naiwen Deng, Guangchao Han, Shuqi Zhu, Xingwang Zhang, Yong Pang and Wei Bai

引用：

Deng, N., Han, G., Zhu, S. et al. Novel Multipoint-drive Rotary Actuator for Extraterrestrial Celestial Ultrasonic Driller. Chin. J. Mech. Eng. 37, 140 (2024). https://doi.org/10.1186/s10033-024-01134-1

Efficient Hierarchical Kriging Modeling Method for High-dimension Multi-fidelity Problems

面向高维多保真度问题的分层Kriging高效建模方法

作者：

Youwei He and Jinliang Luo

引用：

He, Y., Luo, J. Efficient Hierarchical Kriging Modeling Method for High-dimension Multi-fidelity Problems. Chin. J. Mech. Eng. 37, 151 (2024). https://doi.org/10.1186/s10033-024-01136-z

Effect of Structural Configurations on Mechanical and Shape Recovery Properties of NiTi Triply Periodic Minimal Surface Porous Structures

结构构型对NiTi合金三周期极小曲面多孔结构的机械和形状回复性能的影响

作者：

Shuaishuai Wei, Bo Song, Lei Zhang, Xiaobo Wang, Junxiang Fan, Zhi Zhang and Yusheng Shi

引用：

Wei, S., Song, B., Zhang, L. et al. Effect of Structural Configurations on Mechanical and Shape Recovery Properties of NiTi Triply Periodic Minimal Surface Porous Structures. Chin. J. Mech. Eng. 37, 125 (2024). https://doi.org/10.1186/s10033-024-01090-w

A Pressure-Bearing Microwave Transmission Line for Rapid Energy-Efficient Manufacturing Systems of High-End Composite Parts

面向高端复合材料构件高效节能制造系统的耐高压微波传输线

作者：

Jing Zhou, Yingguang Li, Zexin Zhu, Xunyi Qi and Xiaozhong Hao

引用：

Zhou, J., Li, Y., Zhu, Z. et al. A Pressure-Bearing Microwave Transmission Line for Rapid Energy-Efficient Manufacturing Systems of High-End Composite Parts. Chin. J. Mech. Eng. 37, 162 (2024). https://doi.org/10.1186/s10033-024-01147-w

Study on the Relationship Between Vibration Signals in CFRP Grinding and Grinding Mechanism

CFRP磨削振动信号与磨削机理关系的研究

作者：

Lichen Li, Fangyuan Wang, Pengda Song, Kai Jin, Lei Chu, Sansan Ding, Guido A. Berti and Luca Quagliato

引用：

Li, L., Wang, F., Song, P. et al. Study on the Relationship Between Vibration Signals in CFRP Grinding and Grinding Mechanism. Chin. J. Mech. Eng. 37, 165 (2024). https://doi.org/10.1186/s10033-024-01142-1

Genetic Algorithm Optimization Design of Gradient Conformal Chiral Metamaterials and 3D Printing Verification for Morphing Wings

梯度保形手性超材料遗传算法优化设计及变形机翼3D打印验证

作者：

Qian Zheng, Weijun Zhu, Quan Zhi, Henglun Sun, Dongsheng Li and Xilun Ding

引用：

Zheng, Q., Zhu, W., Zhi, Q. et al. Genetic Algorithm Optimization Design of Gradient Conformal Chiral Metamaterials and 3D Printing Verification for Morphing Wings. Chin. J. Mech. Eng. 37, 143 (2024). https://doi.org/10.1186/s10033-024-01132-3

Research on Parameters Optimization of Rectangular Pole Teeth for Magnetic Fluid Seals

磁性液体密封矩形齿的参数优化

作者：

Lu Wang, Zhili Zhang, Decai Li, Zhiqi Liang, Nannan Di and Liu Li

引用：

Wang, L., Zhang, Z., Li, D. et al. Research on Parameters Optimization of Rectangular Pole Teeth for Magnetic Fluid Seals. Chin. J. Mech. Eng. 37, 148 (2024). https://doi.org/10.1186/s10033-024-01129-y

Liner Damage Analysis for Hydrogen Storage Vessels Subjected to Local Compressive Loads Using the Submodeling Method

基于子模型法的储氢容器局部承压内胆损伤分析

作者：

Wen Liu, Lele Zhang, Geng Chen, Yu Zhu and Baofeng Ruan

引用：

Liu, W., Zhang, L., Chen, G. et al. Liner Damage Analysis for Hydrogen Storage Vessels Subjected to Local Compressive Loads Using the Submodeling Method. Chin. J. Mech. Eng. 37, 166 (2024). https://doi.org/10.1186/s10033-024-01155-w

Mechanism

and

Robotics

Multi-Objective Trajectory Optimization for Rigid-Flexible Coupling Spray-Painting Robot Integrated with Coating Process Constraints

融合涂装工艺约束的刚柔耦合喷涂机器人多目标喷涂轨迹优化

作者：

Feng Xu, Bin Zi, Jingyuan Wang and Zhaoyi Yu

引用：

Xu, F., Zi, B., Wang, J. et al. Multi-Objective Trajectory Optimization for Rigid-Flexible Coupling Spray-Painting Robot Integrated with Coating Process Constraints. Chin. J. Mech. Eng. 37, 152 (2024). https://doi.org/10.1186/s10033-024-01130-5

The cLVSM: A Novel Compact Linear Variable Stiffness Mechanism Based on Circular Beams

cLVSM：一种基于圆弧板簧结构的新型移动型变刚度机构

作者：

Yixin Shao, Yufeng Zhou, Di Shi, Yanggang Feng, Xilun Ding and Wuxiang Zhang

引用：

Shao, Y., Zhou, Y., Shi, D. et al. The cLVSM: A Novel Compact Linear Variable Stiffness Mechanism Based on Circular Beams. Chin. J. Mech. Eng. 37, 146 (2024). https://doi.org/10.1186/s10033-024-01098-2

Hybrid Robotic Arm for Autonomous Aerial Refueling

一种用于自主空中加油的混合式机械臂

作者：

Kaixuan Li, Gangfeng Liu, Yongsheng Gao and Jie Zhao

引用：

Li, K., Liu, G., Gao, Y. et al. Hybrid Robotic Arm for Autonomous Aerial Refueling. Chin. J. Mech. Eng. 37, 158 (2024). https://doi.org/10.1186/s10033-024-01150-1

Design and Analysis of a Novel Schönflies Motion Parallel Robot with Full Cycle Rotation

一种新型整周旋转Schönflies运动并联机器人的设计与分析

作者：

Luquan Li, Yuefa Fang, Lin Wang and Jiaqiang Yao

引用：

Li, L., Fang, Y., Wang, L. et al. Design and Analysis of a Novel Schönflies Motion Parallel Robot with Full Cycle Rotation. Chin. J. Mech. Eng. 37, 160 (2024). https://doi.org/10.1186/s10033-024-01116-3

An Untethered Soft-Swallowing Robot with Enhanced Heat Resistance, Damage Tolerance, and Impact Mitigation

一种耐高温、耐损伤、耐冲击的软体吞食机器人

作者：

Haili Li, Xingzhi Li, Pan Zhou and Jiantao Yao

引用：

Li, H., Li, X., Zhou, P. et al. An Untethered Soft-Swallowing Robot with Enhanced Heat Resistance, Damage Tolerance, and Impact Mitigation. Chin. J. Mech. Eng. 37, 135 (2024). https://doi.org/10.1186/s10033-024-01123-4

Dynamic Analysis of Metamorphic Mechanisms with Impact Effects During Configuration Transformation

构态切换中具有冲击效应的变胞机构动力学分析

作者：

Yang Zhou, Boyan Chang, Guoguang Jin and Zhimin Wang

引用：

Zhou, Y., Chang, B., Jin, G. et al. Dynamic Analysis of Metamorphic Mechanisms with Impact Effects During Configuration Transformation. Chin. J. Mech. Eng. 37, 120 (2024). https://doi.org/10.1186/s10033-024-01121-6

Advanced Transportation Equipment

⭐封面文章

Tracking and Fault-Tolerant Controller Design for Uncertain Steer-by-Wire Systems Using Model Predictive Control

基于模型预测控制的不确定性线控转向系统跟踪与容错控制器设计

作者：

Han Zhang, Wentao Jiang, Wanzhong Zhao and Yuanhao Li

引用：

Zhang, H., Jiang, W., Zhao, W. et al. Tracking and Fault-Tolerant Controller Design for Uncertain Steer-by-Wire Systems Using Model Predictive Control. Chin. J. Mech. Eng. 37, 141 (2024). https://doi.org/10.1186/s10033-024-01110-9

Modeling and Analysis of Mixed Traffic Networks with Human-Driven and Autonomous Vehicles

人工驾驶车辆与自动驾驶车辆并存的混合交通网络建模与分析

作者：

Qing Xu, Chaoyi Chen, Xueyang Chang, Dongpu Cao, Mengchi Cai, Jiawei Wang, Keqiang Li and Jianqiang Wang

引用：

Xu, Q., Chen, C., Chang, X. et al. Modeling and Analysis of Mixed Traffic Networks with Human-Driven and Autonomous Vehicles. Chin. J. Mech. Eng. 37, 134 (2024). https://doi.org/10.1186/s10033-024-01118-1

Engagement/Disengagement Characteristics of Pull-Type Diaphragm Spring Clutch for Heavy-Duty Commercial Vehicles

重型商用车拉式膜片弹簧离合器接合分离特性研究

作者：

Zhengfeng Yan, Bingbing Wu, Xinming Gao and Xianxu Bai

引用：

Yan, Z., Wu, B., Gao, X. et al. Engagement/Disengagement Characteristics of Pull-Type Diaphragm Spring Clutch for Heavy-Duty Commercial Vehicles. Chin. J. Mech. Eng. 37, 124 (2024). https://doi.org/10.1186/s10033-024-01115-4

Cause Analysis of Rail Corrugation in Metro Lines Based on System Vibration Characteristics

基于系统振动特性的地铁线路钢轨波磨成因分析

作者：

Zhiqiang Wang, Zhenyu Lei and Yanyun Luo

引用：

Wang, Z., Lei, Z. & Luo, Y. Cause Analysis of Rail Corrugation in Metro Lines Based on System Vibration Characteristics. Chin. J. Mech. Eng. 37, 147 (2024). https://doi.org/10.1186/s10033-024-01151-0

Contact Stiffness Identification Method for Joint Surface and the Effect of Contact Stiffness on the Dynamic Response of the Cable Bracket

电线支架结合面接触刚度识别方法及接触刚度对支架振动的影响研究

作者：

Xue Wei, Zunsong Ren and Guangquan Li

引用：

Wei, X., Ren, Z. & Li, G. Contact Stiffness Identification Method for Joint Surface and the Effect of Contact Stiffness on the Dynamic Response of the Cable Bracket. Chin. J. Mech. Eng. 37, 128 (2024). https://doi.org/10.1186/s10033-024-01135-0

Analysis of Water Film Distribution and Aerodynamic Performances of High-Speed Train Under Rainfall Environment

降雨环境下高速列车车身水膜分布及气动性能分

作者：

Meixiang Li, Mengge Yu, Jiali Liu and Xugao Sheng

引用：

Li, M., Yu, M., Liu, J. et al. Analysis of Water Film Distribution and Aerodynamic Performances of High-Speed Train Under Rainfall Environment. Chin. J. Mech. Eng. 37, 137 (2024). https://doi.org/10.1186/s10033-024-01120-7

Smart Materials

Enhanced Surface Mechanical and Tribological Properties of H13 Die Steel with TiAlSiN Coating Deposited by HiPIMS

高功率脉冲磁控溅射沉积TiAlSiN涂层提高H13模具钢表面力学和摩擦性能

作者：

Jun Lin, Hanxiao Luan, Jiao Li, Jiqiang Zhai, Yanjin Guan, Guoqun Zhao and Ruqing Bai

引用：

Lin, J., Luan, H., Li, J. et al. Enhanced Surface Mechanical and Tribological Properties of H13 Die Steel with TiAlSiN Coating Deposited by HiPIMS. Chin. J. Mech. Eng. 37, 139 (2024). https://doi.org/10.1186/s10033-024-01128-z

Modified Slow-Strain-Rate Tensile Testing Method for Evaluation of Room-temperature Hydrogen Embrittlement Susceptibility and Its Application to 23Cr2Ni4MoV Steel

用于评估室温氢脆敏感性的改进型慢应变速率拉伸试验方法及其在 23Cr2Ni4MoV 钢上的应用

作者：

Sanshu Lv, Xuedong Chen, Zhichao Fan, Yu Zhou, Hao Yang, Qiang Zhang, Mingjian Chi and Yue Li

引用：

Lv, S., Chen, X., Fan, Z. et al. Modified Slow-Strain-Rate Tensile Testing Method for Evaluation of Room-temperature Hydrogen Embrittlement Susceptibility and Its Application to 23Cr2Ni4MoV Steel. Chin. J. Mech. Eng. 37, 133 (2024). https://doi.org/10.1186/s10033-024-01133-2

Effect of Pulsed Current Treatment on Microstructure and Properties of 304 Stainless Steel Ultra-Thin Strip after Rolling

脉冲电流处理对304不锈钢极薄带轧制后组织和性能的影响

作者：

Qi Liu, Wanwan Fan, Zhongkai Ren, Tao Wang and Qingxue Huang

引用：

Liu, Q., Fan, W., Ren, Z. et al. Effect of Pulsed Current Treatment on Microstructure and Properties of 304 Stainless Steel Ultra-Thin Strip after Rolling. Chin. J. Mech. Eng. 37, 149 (2024). https://doi.org/10.1186/s10033-024-01119-0

Stress Corrosion Behavior of MIG Welded Joints of 6082-T6 Aluminum Alloy at Different Temperatures

6082-T6铝合金MIG焊接接头在不同温度下的应力腐蚀行为

作者：

Guanda Qu, Wei Guo, Hongqiang Zhang, Zhikang Shen, Lijiao Zhang, Wei Dai, Jun Xiao, Junliang Xue, Hongbin Zhu, Minggao Li and Xin Ren

引用：

Qu, G., Guo, W., Zhang, H. et al. Stress Corrosion Behavior of MIG Welded Joints of 6082-T6 Aluminum Alloy at Different Temperatures. Chin. J. Mech. Eng. 37, 167 (2024). https://doi.org/10.1186/s10033-024-01104-7

Mechanical Properties Optimization and Microstructure Analysis of Pure Copper Heterostructured Laminates via Rolling

纯铜异质结构轧制层压板力学性能优化及微观结构分析

作者：

Zhihui Gao, Tao Wang, Yunlai Zhao, Hua Ding and Qingxue Huang

引用：

Gao, Z., Wang, T., Zhao, Y. et al. Mechanical Properties Optimization and Microstructure Analysis of Pure Copper Heterostructured Laminates via Rolling. Chin. J. Mech. Eng. 37, 126 (2024). https://doi.org/10.1186/s10033-024-01102-9

Inhibition Mechanism of the Interface Reaction in the Molten Pool of SiCp/Al Composites by Pulsed Laser Welding with Powder-Filling

脉冲激光填粉焊接SiCp/Al复合材料熔池界面反应的抑制机理

作者：

Yan Shi, Shupeng Wang and Yongchao Jian

引用：

Shi, Y., Wang, S. & Jian, Y. Inhibition Mechanism of the Interface Reaction in the Molten Pool of SiCp/Al Composites by Pulsed Laser Welding with Powder-Filling. Chin. J. Mech. Eng. 37, 154 (2024). https://doi.org/10.1186/s10033-024-01141-2

Investigation Study of Structure Real Load Spectra Acquisition and Fatigue Life Prediction Based on the Optimized Efficient Hinging Hyperplane Neural Network Model

基于优化高效铰链超平面神经网络模型的结构真实载荷谱采集与疲劳寿命预测研究

作者：

Lin Zhu, Benao Xing, Xingbao Li, Min Chen and Minping Jia

引用：

Zhu, L., Xing, B., Li, X. et al. Investigation Study of Structure Real Load Spectra Acquisition and Fatigue Life Prediction Based on the Optimized Efficient Hinging Hyperplane Neural Network Model. Chin. J. Mech. Eng. 37, 153 (2024). https://doi.org/10.1186/s10033-024-01124-3

Variable-Diameter Deployable Structure Composite Preforms Made by Braiding and Needle-Punching Integrated Forming Technology

变径可展开结构复合材料预制体编织-针刺复合成形技术

作者：

Zhengxi Zhou, Zitong Guo, Zhongde Shan, Zheng Sun, Jun Zhang, Fengchen Geng, Yaoyao Wang, Tianzheng Yang and Zhiqi Zhuang

引用：

Zhou, Z., Guo, Z., Shan, Z. et al. Variable-Diameter Deployable Structure Composite Preforms Made by Braiding and Needle-Punching Integrated Forming Technology. Chin. J. Mech. Eng. 37, 155 (2024). https://doi.org/10.1186/s10033-024-01140-3

责任编辑：谢雅洁

责任校对：向映姣

审 核：张 强

JME学院简介

JME学院是由《机械工程学报》编辑部2018年创建，以关注、陪伴青年学者成长为宗旨，努力探索学术传播服务新模式。

欢迎各位老师扫码添加小助理-暖暖为好友，由小助理拉入JME学院官方群！

欢迎关注JME学院视频号~

寻觅合作伙伴

有一种合作叫做真诚，有一种发展可以无限，有一种伙伴可以互利共赢，愿我们合作起来流连忘返，发展起来前景可观。关于论文推荐、团队介绍、图书出版、学术直播、招聘信息、会议推广等，请与我们联系。

感谢关注我们！我们《机械工程学报》编辑部将努力为您打造一个有态度、有深度、有温度的学术媒体！

版权声明：

本文为《机械工程学报》编辑部原创内容，欢迎转载，请联系授权！

在公众号后台留言需要转载的文章题目及要转载的公众号ID以获取授权!

微信投稿、转载等：

联系人：暖暖

电话：010-88379909

E-mail：jme@cmes.org

网 址：http://www.cjmenet.com.cn

官方微信号：jmewechat